The Toccoa Hull design is roughly 14’6” overall in length from tip of the Stem to the top of the Transom and a beam of roughly 70”. It is constructed as follows:

  • ½” Hydrotek Marine Grade Plywood (or similar) with (2) layers of 6oz. Fiberglass Cloth on the Exterior Bottom and (1) layer of 6oz. Fiberglass Cloth on the Interior Floor.
  • 3/8” Okoume (or similar) Marine Grade Plywood sides with the Outside layered in 6oz. Fiberglass Cloth and the Interior coated in epoxy resin.
  • ½” Hydrotek Marine Grade Plywood (or similar) with (2) layers of 6oz. Fiberglass Cloth on the Exterior Transom and the Interior coated in epoxy resin.
  • All Hull Seams are taped with 12oz. Biaxial Fiberglass Tape for strength and faired smooth.
  • Forward Thwart with Bench Seat
  • Guide or Oarsman Position Thwart with Bench Seat
  • Stern Thwart with Bench Seat
  • Forward Knee Brace
  • Aft Knee Brace Arch from port to starboard
  • (2) Position Oar Locks
  • (4) Position Foot Rest for the Guide/Oarsman
  • Oak or Ash Breast Hook and Gunwales
  • All wood is sealed with Epoxy and Natural Finished wood is Varnished to protect from UV
  • (3) Cup Holders, one at each seating location
  • Interior floor, hull seams and up approximately 5” will be painted with a non-skid finish, Light Gray is standard, but you may choose White, Black or Light Gray.
  • White Painted Interior hull sides
  • Black Bottom Paint extending approximately 5” up on the sides
  • Painted Hull with Interlux (or similar) 2-part Polyurethane
  • Sawyer Station Sawyer Utility Oar
  • Bronze Open (Type A) Oarlock
  • Bow Eye
  • Dierks Anchor System with Cam-Cleat Release
  • MANUFACTURER’S CERTIFICATE OF ORIGIN for Registration
  • 20 Year Hull Warranty against manufacture defects.

What is standard?

Options

  • Kevlar Bottom
    • – 5oz Aramid (Kevlar) Cloth laid in Exterior Bottom Fiberglass for Strength and abrasion resistance. Bottom will be constructed with three layers as such 6oz. Fiberglass Cloth, 5oz. Aramid (Kevlar) Cloth and outer 6oz. Fiberglass Cloth
  • Upgraded Seating
    • Two person forward thwart
    • Guide/Oarsman Seat
    • Aft Seat
  • All Wood Interior
    • All wood interior including; interior sides from Interior Bottom Paint line (Roughly 5” from bottom) to Gunwales; Thwarts, Seats, Hatch Covers and Vertical Surfaces above the Bottom Paint line
      • Hull Sides and Vertical Surfaces Mahogany finish
      • All Trim and other wood surface as specified above under Standard Wood Choice
  • Port and Starboard Dry Boxes with Rod Storage
    • Top access Dry Boxes located amidships, both port and starboard with tops extending fore and aft providing Rod Storage under for (2) Rods to Port and (2) Rods to Starboard.
  • Trailer
    • 2000lb Rating, Channel Steel to prevent sitting water, no brakes, 12” wheels, LED Lights, Stern Rollers, Guide-On Rollers, Black Paint, 1400 lb. Winch, 1200 lb Jack, Economy front and rear steps.
  • Matching Exotic Wood Laminated Breast Hook, Oar Locks and Transom Plate
  • Pedestals
    • Standard Front Pedestal
    • Front Pedestal for Cooler Storage
    • Aft Pedestal
  • Guide/Oarsman Hoop Add Drawer Storage
  • Foot Released Anchor
  • Sawyer Station Brand Upgraded Oars
  • Sawyer Station Upgraded Oar Locks
  • Outboard Motor Transom Attachment
  • Contoured Custom Knee Brace
  • Stand-Off Inwales
  • Extra Cup Holders